Starbord wall segments and example models of attachment hooks and shelf braces are available from:

Ready to print STLs as well as full parametric Fusion 360 models are provided.

If you decide to modify/remix and share a model, please refer to the Starbord license. Thanks!

Board segment

Basic wall board segment. Can be extended in any direction with more segments. The provided size happens to just barely fit the Bambu Lab 256x256 mm hot plate. See Printing for more info.

Star connector (semi flat)

Place behind board segments in junctions to:

  • a) Attach board segments together - drive in a countersunk M6 screw from behind OR
  • b) Connect board segments to the wall - drive a screw thru the board segment and the star connector and into the wall

Wall spacer

Keeps 6mm space between the board and the wall.

Wall spacer

Large hook

For hanging heavier items.

Large hook

Small hook

For hanging lightweight items.

Small hook

Gridfinity base plate shelf bracket

Supports any size gridfinity base plates. Two will support a single Gridfinity plate, three will support two plates, and so on. Requires base plates with screw holes (screw from top). Starbord hole spacing is the same as grid spacing in Gridfinity, so bins and their holders align perfectly on the board next to each other.

Gridfinity shelf bracket

Locking pin

Any attachment hanging from the large tapered holes needs to be locked in place vertically. Use a pin like this or an M6 bolt.

Locking pin